Dimensional checks

Dimensional Verification

Define the feature to be measured, the applicable drawing or standard, the inspection tool and the evidence your quality team needs. KingPo can then review the suitable gauge, reference item, measurement approach and document scope.

Prepare your inquiry

Send the feature, reference and evidence requirement

Include a sample photo or drawing when available, identify the checked connector side, and state whether you need a gauge, measured results, a certificate or recertification support.

Information to provide

Define the dimensional verification scope

These four inputs let engineering distinguish a product request from a measurement or documentation request.

Measured feature

Identify the diameter, angle, profile, length, thread, surface or other feature that must be checked.

Gauge

State whether the request concerns a ring gauge, plug gauge, reference connector or another inspection tool.

Drawing

Provide the applicable standard, Figure, controlled drawing or specification reference and its current revision.

Certificate

Describe the required report, calibration statement, measured results or recertification wording before quotation.

Method context

Dimensional verification is a method, not one instrument

Connector and gauge geometry can be verified with hand gauges, optical or vision measurement, thread scanning or a coordinate measuring machine. The method is selected by the feature being verified and by the record the customer quality team needs, not by which instrument happens to be free.

Vision measurement workstation inspecting precision ISO 80369 connector geometry and dimensions

Illustrative vision-measurement workstation checking connector geometry. Readings on the display are schematic and are not measurements.

Gauges verified with these methods
Related product roles

Select the inspection item before confirming the service

Gauges check defined conditions on the sample. Reference connectors provide a controlled mating interface for applicable verification work. The required drawing and certificate scope should match the selected item.