Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
Product image available on request.
Leakage equipment RFQs should describe the pressure source, measurement channel, connector support, reference connector, DUT connection and expected result evidence as one test setup.
| Standard / Figure | Confirm applicable standard and product family |
|---|---|
| Product type | test equipment |
| Connector family | leakage tester family |
| RFQ inputs | Mating connector, method, quantity, fixture and certificate needs |
| Calibration | Discuss certificate scope and traceability needs for the requested product scope |
Share the accessory, fixture, certificate and shipping needs so KingPo can identify the right product scope.
Use the method path to decide whether the order needs only this item, a matched counterpart, a fixture, test equipment or a complete set.
Send the Annex or method, connector sample, fixture interface, pressure or vacuum route, report expectation and certificate need together.
Prepare equipment RFQDatasheets, operating documents and report examples should match the selected equipment configuration and order scope.
Request documentsA multi-mode leakage station should be treated as a configuration discussion until KingPo confirms the required pressure, air, liquid, fixture and connector interfaces. Use the RFQ to state which ISO 80369-20 Annex route and connector family the station must support.
ISO 80369 Multi-Mode Leakage Test Station supports air or liquid leakage under a controlled pressure condition for ISO-80369-20. Buyers should start from the ISO 80369-20 Annex or method route, then confirm the connector under test, mating reference item, pressure or liquid path, fixture support and report requirement.
A leakage setup is more than a pressure source. It includes the specimen connection, reference connector or counterpart, controlled volume, pressure or liquid handling path, measurement channel and result record. Missing one of these details usually delays quotation.
Before RFQ, confirm pressure range, medium, connector support, leakage method and result evidence. KingPo can then discuss whether the order needs only the tester, or a complete route with reference connectors, fixtures, operating documentation and report examples.
Use the subatmospheric air leakage tester for Annex D vacuum/reduced-pressure questions, axial-load equipment for separation from axial load, and connector assembly or torque fixtures when the measured action is not leakage.
Quote requests should include product, Figure, standard part, connector side, mating counterpart, test method, fixture need, quantity, calibration requirement and certificate expectation.
Request this productIt supports a specific ISO 80369 test action such as leakage, axial load, torque, overriding or stress-cracking evaluation.
Provide the standard part, connector type, mating side, test method, quantity, fixture need, calibration need and certificate requirement.
Yes. Include sample drawings or photos, fixture interface, equipment channel and documentation expectations so the scope can be discussed.
No. Final technical values should come from approved datasheets or KingPo engineering records for the requested product scope.
Yes. State the measured feature or channel, certificate wording and traceability expectation when requesting calibration.
Continue from this page into the related standard, product family, requirement or test method before preparing the RFQ.
Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
Use this page to prepare ISO 80369 connector, product, standard and RFQ context for KingPo review.
