KingPoISO 80369 Testing
Request a Quote
IEC 80369-5 / IEC

Limb cuff inflation applications

Connectors for limb cuff inflation applications.

Browse product typesReview test methods
IEC 80369-5:2016 Limb cuff inflation applications product and test method context
Selection path

Move from the standard to a reviewed product path

Confirm cuff inflation connector role, applicable corrigenda, method and fixture needs.

  • Standard
  • Application
  • Connector
  • Figure or Annex
  • Product Type
  • Product
  • Test Method
  • Equipment or Fixture
  • Calibration
  • Evidence
  • Page
Registry facts

Application, connector and evidence fields

Fields marked pending need engineering review before they become product claims.

Field
Current registry value
Product implication
Review state
Edition

2016 with COR1:2017 and COR2:2021

Published

verified_public_source

Connector designation

limb cuff inflation connector family

Use figure-specific reference connector only when product evidence exists.

standard_fact

Figures or annexes

figure or annex mapping pending product review

Fixture selection depends on method and sample interface.

verified_public_source

Gauge

No gauge assumption unless a gauge product record exists.

Calibration route depends on item type and certificate wording.

verified_public_source

Complete system

Complete setup combines standard, product, method, equipment, fixture and documents.

pressure equipment, force equipment, torque equipment, fixtures

standard_fact

Product type routing

Choose by what the buyer needs to select

Reference Connectors

Match a sample connector to the figure-defined reference interface needed for functional testing.

standard part / figure or annex / male or female / slip or lock / rigid or semi-rigid / certificate expectation

Gauges and Gauge Sets

Inspect Luer dimensional or fit conditions without confusing gauges with reference connectors.

checked sample side / ring or plug / lock or slip / individual gauge or set / certificate wording

ISO 80369-20 Test Equipment

Select the instrument path by measured action: leakage, force, torque, overriding or stress cracking.

method annex / pressure or force or torque channel / fixture / sample side / report requirement

Fixtures and Assembly Devices

Hold, align or assemble the connector pair so the chosen method can be repeated.

sample geometry / mating counterpart / axial or side load / torque interface / method annex

Complete Test Systems

Quote multiple items as one reviewed setup when the buyer needs method coverage rather than a single part.

standard part / method group / reference connectors / fixtures / equipment / calibration route

Calibration and Recertification

Choose the right verification or certificate route for gauges, reference connectors and instrument channels.

item type / measured feature / traceability wording / third-party accredited lab option / recertification interval

Representative products and methods

Open product samples or method groups from this standard

Leakage and pressure

Leakage methods

Pressure decay, positive-pressure liquid leakage or subatmospheric-pressure air leakage.

Mechanical separation

Separation and axial load methods

Resistance to separation from axial load and related mechanical setup.

Torque and lock-interface behavior

Torque and unscrewing methods

Unscrewing, overriding or related torque-channel behavior.

Material and environmental resistance

Stress cracking method

Stress cracking evaluation for connector condition after exposure and assembly context.

Evidence

Source records used by this page